Construction in the rainy season is often difficult, and it will also affect the working efficiency and service life of our loaders. So how can we avoid the bad effects of the rainy season? Let's take a look!
When the road surface is severely muddy or in other conditions, anti-skid chains can be installed to increase the safety factor. The installation of anti-skid chains should be carried out in advance. If there are special circumstances, safety warning signs must be placed before and after the loader. Do not install anti-skid chains when the tire pressure is insufficient. Secondly, pay attention to the size of the anti-skid chains. Choose anti-skid chains that match the size of wheel hubs and wheel widths of different sizes. After installing anti-skid chains, be careful not to drive the loader too fast, and Be careful to avoid sudden acceleration or deceleration causing damage to the tire chain.
After operation in the rainy season, be sure to clean the loader chassis, maintain and refuel the necessary places to prevent rust, check whether the oil drain screws are loose, and perform maintenance in a timely manner. If you find that there is water in the machine, clean it up in time to avoid rust. Affects the flexibility of the machine.
During rainy season, it is best to park with the engine part facing inside the garage. If it can only be parked in the open air, pay attention to check whether the fuel tank and hydraulic tank lids are tightly closed. It is best to cover them with waterproof bags to prevent rainwater from seeping into the fuel tanks.If the battery is easy to remove, it is best to put it in a dry room.
On rainy days, you should also pay attention to checking the filter element of the loader's air filter to prevent rainwater from entering, which may cause the paper filter element to deteriorate, damage and become clogged. It must be replaced and maintained in time.
Pay attention to the wear and tear of the sealing ring on the engine oil dipstick to avoid wear and tear that may cause rainwater to seep into the engine oil. The oil filling port must also be checked, and the generator usage must be checked. All line joints must be protected from moisture, which may affect the power generation effect.
